Register

Consider a fully-clamped circular diaphragm poly-Si with a radius of 250 μm and a thickness of 4 μm. Assume that Young’s modulus is 130 GPa and Poisson’s ratio is 0.3. A uniform…

Consider a fully-clamped circular diaphragm poly-Si with a radius of 250 μm and a thickness of 4 μm. Assume that Young’s modulus is 130 GPa and Poisson’s ratio is 0.3. A uniform…
asked 165k views
0 votes
Consider a fully-clamped circular diaphragm poly-Si with a radius of 250 μm and a thickness of 4 μm. Assume that Young’s modulus is 130 GPa and Poisson’s ratio is 0.3. A uniform pressure of 20 kPa is applied.

(a) What is the stress at the center of the diaphragm?
(b) What is the radial stress at the fully-clamped edge of the diaphragm?
(c) What is the transverse stress at the fully-clamped edge of the diaphragm?
(d) What is the amount of deflection at the center of the diaphragm?

asked
User Bojan
by
8.0k points

1 Answer

4 votes

Answer:

Step-by-step explanation:

find attached the solution to the question

Consider a fully-clamped circular diaphragm poly-Si with a radius of 250 μm and a-example-1
Consider a fully-clamped circular diaphragm poly-Si with a radius of 250 μm and a-example-2
Consider a fully-clamped circular diaphragm poly-Si with a radius of 250 μm and a-example-3
Consider a fully-clamped circular diaphragm poly-Si with a radius of 250 μm and a-example-4
answered
User Xennygrimmato
by
8.4k points
← Prev Question Next Question →

Related questions

User Zareh
asked Sep 28, 2024 198k views
What are the equations for Young's modulus and Poisson's ratio?
Zareh asked Sep 28, 2024
by Zareh
7.8k points
1 answer
3 votes
198k views
User Nivs
asked Jul 5, 2020 120k views
What is the relation between Poisson's ration, young's modulus, shear modulus for an material?
Nivs asked Jul 5, 2020
by Nivs
8.5k points
1 answer
5 votes
120k views
Ask a Question
Welcome to Qamnty — a place to ask, share, and grow together. Join our community and get real answers from real people.

Categories

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
Link Copied!