Register

Imagine you have to create a pet robot that responds to touch. When someone touches or pets the head of the robot, the LED lights should blink. You have to create the robot head…

Imagine you have to create a pet robot that responds to touch. When someone touches or pets the head of the robot, the LED lights should blink. You have to create the robot head…
asked 27.4k views
5 votes
Imagine you have to create a pet robot that responds to touch. When someone touches or pets the head of the robot, the LED lights should blink. You have to create the robot head with legs. List the components and tools you will use to create this robot. Research online if required.

asked
User Saccodd
by
8.5k points

1 Answer

3 votes

Answer:

ive been stuck on this for 30 minutes bro

Step-by-step explanation:

answered
User Ederbf
by
8.1k points
← Prev Question Next Question →

Related questions

Ask a Question
Welcome to Qamnty — a place to ask, share, and grow together. Join our community and get real answers from real people.

Categories

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
Link Copied!