Register

A water treatment plant processes 30,000 cubic meters of water each day. A square rapid-mix tank with vertical baffles and flat impeller blades will be used. The design detentio…

A water treatment plant processes 30,000 cubic meters of water each day. A square rapid-mix tank with vertical baffles and flat impeller blades will be used. The design detentio…
asked 219k views
0 votes
A water treatment plant processes 30,000 cubic meters of water each day. A square rapid-mix tank with vertical baffles and flat impeller blades will be used. The design detention time and velocity gradient are 30 seconds and 900 s-1 Determine the power input, if the temperature of the water is 20°C. µ = 1 x 10-3 kg/m•s. 1kW = 1000 J/s, 1J = 1N•m = 1 kg•m2/s2. Note: you can use the equation in its current version.

asked
User Vsz
by
7.6k points

1 Answer

4 votes

Answer:

P=8.44 kw

Step-by-step explanation:

[Find the given attachment for solution]

A water treatment plant processes 30,000 cubic meters of water each day. A square-example-1
answered
User Woodrow
by
8.2k points
← Prev Question Next Question →

Related questions

Ask a Question
Welcome to Qamnty — a place to ask, share, and grow together. Join our community and get real answers from real people.

Categories

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
Link Copied!