Register

A cylindrical specimen of a metal alloy 45.8 mm long and 9.72 mm in diameter is stressed in tension. A true stress of 378 MPa causes the specimen to plastically elongate to a le…

A cylindrical specimen of a metal alloy 45.8 mm long and 9.72 mm in diameter is stressed in tension. A true stress of 378 MPa causes the specimen to plastically elongate to a le…
asked 99.1k views
2 votes
A cylindrical specimen of a metal alloy 45.8 mm long and 9.72 mm in diameter is stressed in tension. A true stress of 378 MPa causes the specimen to plastically elongate to a length of 54.2 mm. If it is known that the strain-hardening exponent for this alloy is 0.2, calculate the true stress (in MPa) necessary to plastically elongate a specimen of this same material from a length of 45.8 mm to a length of 55.8 mm

asked
User Cesare
by
8.0k points

1 Answer

2 votes

Answer:

390.242 MPa

Step-by-step explanation:

Attached is the full solution.

A cylindrical specimen of a metal alloy 45.8 mm long and 9.72 mm in diameter is stressed-example-1
A cylindrical specimen of a metal alloy 45.8 mm long and 9.72 mm in diameter is stressed-example-2
answered
User GemK
by
8.9k points
← Prev Question Next Question →

Related questions

Ask a Question
Welcome to Qamnty — a place to ask, share, and grow together. Join our community and get real answers from real people.

Categories

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!