Register

A cylindrical specimen of a metal alloy 45.8 mm long and 9.72 mm in diameter is stressed in tension. A true stress of 378 MPa causes the specimen to plastically elongate to a le…

A cylindrical specimen of a metal alloy 45.8 mm long and 9.72 mm in diameter is stressed in tension. A true stress of 378 MPa causes the specimen to plastically elongate to a le…
asked 99.1k views
2 votes
A cylindrical specimen of a metal alloy 45.8 mm long and 9.72 mm in diameter is stressed in tension. A true stress of 378 MPa causes the specimen to plastically elongate to a length of 54.2 mm. If it is known that the strain-hardening exponent for this alloy is 0.2, calculate the true stress (in MPa) necessary to plastically elongate a specimen of this same material from a length of 45.8 mm to a length of 55.8 mm

asked
User Cesare
by
8.0k points

1 Answer

2 votes

Answer:

390.242 MPa

Step-by-step explanation:

Attached is the full solution.

A cylindrical specimen of a metal alloy 45.8 mm long and 9.72 mm in diameter is stressed-example-1
A cylindrical specimen of a metal alloy 45.8 mm long and 9.72 mm in diameter is stressed-example-2
answered
User GemK
by
8.9k points
← Prev Question Next Question →

Related questions

Ask a Question
Welcome to Qamnty — a place to ask, share, and grow together. Join our community and get real answers from real people.

Categories

Other Questions

4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
Link Copied!