Register

A 300 mm long steel bar with a square cross section (25 mm per edge) is pulled in tension with a load of 83,051 N , and experiences an axial elongation of 0.18 mm. Assuming that…

A 300 mm long steel bar with a square cross section (25 mm per edge) is pulled in tension with a load of 83,051 N , and experiences an axial elongation of 0.18 mm. Assuming that…
asked 172k views
5 votes
A 300 mm long steel bar with a square cross section (25 mm per edge) is pulled in tension with a load of 83,051 N , and experiences an axial elongation of 0.18 mm. Assuming that the deformation is entirely elastic, calculate the elastic modulus of this steel in GPa. Answer Format: X (no decimal places) Unit: GPa

asked
User GhostFlying
by
8.8k points

1 Answer

4 votes

Answer:

the answer is attached with required units.

Step-by-step explanation:

A 300 mm long steel bar with a square cross section (25 mm per edge) is pulled in-example-1
answered
User Ichbinblau
by
8.2k points
← Prev Question Next Question →

Related questions

Ask a Question
Welcome to Qamnty — a place to ask, share, and grow together. Join our community and get real answers from real people.

Categories

Other Questions

4. Which of the following is the first thing you should do when attempting to park? A. Securing the parking spot by standing in it B. Turning on your hazard lights C. Confirming the space can fit your
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
Link Copied!