Register

Determine the values of the lumped parasitic capacitor and inductor in a 5 ft long two-wire transmission line with air dielectric (See Chapter 7 in the Stanley and Harrington te…

Determine the values of the lumped parasitic capacitor and inductor in a 5 ft long two-wire transmission line with air dielectric (See Chapter 7 in the Stanley and Harrington te…
asked 123k views
3 votes
Determine the values of the lumped parasitic capacitor and inductor in a 5 ft long two-wire transmission line with air dielectric (See Chapter 7 in the Stanley and Harrington textbook). Each wire has a diameter of 1 mm and the separation between the wires is 1 inch. Show your calculations and the equations used.

asked
User Klozovin
by
8.6k points

1 Answer

4 votes

Answer: See attachment below

Step-by-step explanation:

Determine the values of the lumped parasitic capacitor and inductor in a 5 ft long-example-1
Determine the values of the lumped parasitic capacitor and inductor in a 5 ft long-example-2
answered
User Nobody
by
8.5k points
← Prev Question Next Question →

Related questions

Ask a Question
Welcome to Qamnty — a place to ask, share, and grow together. Join our community and get real answers from real people.

Categories

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
Link Copied!