Register

An axial flow pump is to discharge 5 cusecs at an operating speed of 1450 rev/min. The inner and outer diameters of the impeller are to be 5.5 in. and 11 in. respectively. If th…

An axial flow pump is to discharge 5 cusecs at an operating speed of 1450 rev/min. The inner and outer diameters of the impeller are to be 5.5 in. and 11 in. respectively. If th…
asked 151k views
4 votes
An axial flow pump is to discharge 5 cusecs at an operating speed of 1450 rev/min. The inner and outer diameters of the impeller are to be 5.5 in. and 11 in. respectively. If the head developed according to the vector triangles is 20 ft, determine the angle of the vane tips at the inner and outer diameters and the corresponding diffuser blade angle (the diffuser blades are the stationary blades after the impeller).

asked
User Josefina
by
7.7k points

1 Answer

4 votes

Answer:

if you want it to go faster add chain

Step-by-step explanation:

answered
User Gena Kukartsev
by
8.0k points
← Prev Question Next Question →

Related questions

Ask a Question
Welcome to Qamnty — a place to ask, share, and grow together. Join our community and get real answers from real people.

Categories

Other Questions

A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
Adding moisture is the ONLY way to obtain saturated air from unsaturated air. a)-True b) False
Link Copied!