Register

A circuit contains four 100 ohm resistors connected in series. If you test the circuit with a DMM you should read a total resistance value of A. 250 ohms. . B. 1000 ohms C. 400 …

A circuit contains four 100 ohm resistors connected in series. If you test the circuit with a DMM you should read a total resistance value of A. 250 ohms. . B. 1000 ohms C. 400 …
asked 99.8k views
5 votes
A circuit contains four 100 ohm resistors connected in series. If you test the circuit with a DMM you should read a total resistance value of

A. 250 ohms.
. B. 1000 ohms
C. 400 ohms
D. 100 ohms

asked
User Skeej
by
7.6k points

1 Answer

3 votes
C is the correct answer
answered
User Cyval
by
7.6k points
← Prev Question Next Question →

Related questions

Ask a Question
Welcome to Qamnty — a place to ask, share, and grow together. Join our community and get real answers from real people.

Categories

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
Link Copied!