Register

For the siphon shown in Figure, determine the flowrate out of the siphon and the absolute pressure at the crest of the siphon assuming that there is no losses through the pipe. …

For the siphon shown in Figure, determine the flowrate out of the siphon and the absolute pressure at the crest of the siphon assuming that there is no losses through the pipe. …
asked 168k views
4 votes
For the siphon shown in Figure, determine the flowrate out of the siphon and the absolute

pressure at the crest of the siphon assuming that there is no losses through the pipe.
2.00 m
Del
50-mm-diameter
Oil (s.g. =0.82)
5.00 m

For the siphon shown in Figure, determine the flowrate out of the siphon and the absolute-example-1
asked
User Roselia
by
9.1k points

1 Answer

2 votes
The awsner would be 3.00 because you would subtract by 2
answered
User Adesara
by
8.0k points
← Prev Question Next Question →

Related questions

Ask a Question
Welcome to Qamnty — a place to ask, share, and grow together. Join our community and get real answers from real people.

Categories

Other Questions

A piston-cylinder device fitted with stops in the cylinder walls contains 2.1 kg of water initially at 150 kPa and 30 °C. Heat is transferred to the system until the final temperature reaches 250 °C. The
A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
The bulk modulus of a fluid if it undergoes a 1% change in volume when subjected to a pressure change of 10,000 psi is (a) 0.01 psi (b) 0.001 psi (c) 0.00001 psi (d) 0.000001 psi (e) none of these
Link Copied!