Register

A multipoise furnace a. Is no longer manufactured and should be replaced when encountered in the field. B. May require some components to be relocated depending on the installat…

A multipoise furnace a. Is no longer manufactured and should be replaced when encountered in the field. B. May require some components to be relocated depending on the installat…
asked 21.2k views
5 votes
A multipoise furnace a. Is no longer manufactured and should be replaced when encountered in the field. B. May require some components to be relocated depending on the installation position. C. May require the spuds(orifices) to be changed when installed in the downflow position

asked
User Robfuscator
by
8.3k points

1 Answer

1 vote

Answer:

may require some components to be relocated depending on the installation position.

Step-by-step explanation:

answered
User Rich Pauloo
by
8.1k points
← Prev Question Next Question →

Related questions

Ask a Question
Welcome to Qamnty — a place to ask, share, and grow together. Join our community and get real answers from real people.

Categories

Other Questions

A water towers lowest point is 405 ft and the main line is 6 feet below the ground. The ground elevation is at 276 ft. The main line travels 2.9 miles. The pipe will travel through the following flanged
An activated sludge plant is being designed to handle a feed rate of 0.438 m3 /sec. The influent BOD concentration is 150 mg/L and the cell concentration (MLVSS) is 2,200 mg/L. If you wish to operate the
A car has an initial speed of 10 m/s. It then undergoes a constant acceleration of 0.05 m/s^2 over a distance of 5 km. Determine: a) The car final speed. b) The time needed to travel the 5 km.
Link Copied!